Ceiling painting

You have already chosen and bought a paint tool, released from the furniture to the room in which you will paint the ceiling and perform all work necessary for the preparation described in article painting the ceiling. It is time to understand what is the technology of painting the ceiling. The quality and durability of the paint your ceiling depends directly on whether the technology of painting the ceiling is made in full on all stages of the work.
Preparation of the base ceiling. The ceiling before the painting is in the cleaning of the surface from the old paint, whitewash. All speakers irregularities treated with sandpaper, small cracks, pre-moistened with water, wipe putty. The prepared surface should be cleaned from dust formed in the process of preparation of the ceiling.
Primer ceiling. Before painting of the ceiling, you must perform the paint surface. Without primer paint will not be held on the ceiling (ceiling quickly absorb a moisture and paint dry up, almost losing the property of a full-sizable fledged adhesion) and eventually begins to crumble. When the primer has dried up to the most dark spots. If you want to smooth the surface of the ceiling, then after full drying of the first layer of primer is re-primer. It is necessary to pay attention to the fact that the surface of the no extra priming structure.
Painting the corners of the ceiling. Paint the corners of the ceiling should start from the farthest corner relative to the input. Need to wet brush in the paint to half the length of the cloth and wipe the excess paint on the inside of the tank with the paint. painted brush strip of 3-5 cm around the perimeter of the flow in such a way that when painting roller of the main surface of the ceiling, roller not spoiled the corners and the line connecting the walls and ceiling.

Impregnation of the roller. Well, the corners are painted, you can begin to paint the ceiling surface. So that there were no stains, should not be roller dip in the paint. Roller enough roll in латке, adding to the латок a small amount of paint, overcome, to remove excess paint with a brush. Coating of paint on the shaft should be uniform.
Painting of the ceiling. Paint roller on the surface of the ceiling should be applied not too thick and evenly. When a thick or liquid paint on the surface of the ceiling is possible the formation of wrinkles. Shall be resolved this by bringing the solution of the paint to the optimal viscosity and repainting waste of space. The painting of the ceiling runs parallel strips overlap of about 10 centimeters. In the process of painting the sprayed area of the ceiling must be at different angles - this will help timely notice poorly dyed parts of the ceiling and to eliminate defects. In the process of painting in the room it is necessary to eliminate draughts, the penetration of sunlight into the room, do not include the additional heating appliances, to eliminate all the factors contributing to the rapid drying and drying of the paint.