So, let's start from the beginning... And at first I wanted to use a decorative coating the whole of its passage. But then the frightened, whether began to feel sorry for, but the corridor I поклеила Wallpaper. BUT... there is one more detail: in the middle of the corridor with me hanging bearing beam. To remove it, I can not. Long thought, what to do with it: too pokleit Wallpaper, finished with stone or brick. Then it dawned on me. I remembered a decorative plaster and decided all the same to take a risk and try it finished with their beam.
For a start I like you crawled into the Internet and seen enough video materials on which the technology of applying the plaster was quite clearly shown. Also described in detail what kind of plaster buy and what tools to use.
Armed with the knowledge, I went for the source materials in Максидом (not advertising) Where, after a short walk, I saw a booth with the right materials me... Пораспрашивала a little, standing next любезнейшего of the seller and eventually acquired the following...
Applied on the wall material need with a trowel. This is a plastic or steel rectangular blade with a comfortable handle. Next itself plaster... Bucket on 8 kg, on which is written “textured paint.” As originally decorative coating is white, it was necessary to purchase Kohler: the paint of the desired color. In the Maxidom I put a Finnish тикуриллу. Okay, I decided not to save money and grudgingly... Only took me 1.5 thousand rubles on the area of 3 square meters. At the same time the decorative plaster is 400 p (8 kg), so if you buy an inexpensive Kohler, the price is not so bite and it turns out it is quite cost-effective coating on the walls. Consumption of material 1 - 2 kg per square meter depending on the thickness of the layer.
Well, back home... it's Time for the case to proceed. First, I, as stated on the package, carefully mixed plaster. Blot the beam did not become. This is because of laziness. You are advised to primed for more than a firm grip. Further narrow spatula, which I already had in stock inflicted on кельму layer of plaster. Then the matter of technique... Trowel inflicted on the beam of a thin layer (from 1 up to 3 mm) of the plaster. By the way, very good smooths the surface.
All. Now you can do with your decorative wall anything. Plaster plastic. Take any form. You can take the roller from a NAP and flowing movements to give the desired texture. Then take a spatula and a little bit of smoothing. It turns out the so-called coverage - короед. It is a nice and tidy. You can also do it with the help of any sponges, and then also smooth trowel.
In principle how to deliver a decorative plaster on walls and a figure and a relief to her to give entirely depends on your imagination. You can take a brush and broad strokes to give texture. Also for giving relief is used trowel, figured roller, simple spatula. You can apply the plaster in two layers, etc.
As I did? Just took, already familiar to narrow spatula and gentle undulating movements gave you want me relief. Let's just say: I definitely was not disappointed, finishing was unique and original. Don't know if you will understand something in the photo above... Well, as it happens.
Plaster dry after 24 hours, as I did her a rather thick layer. Now it remains only to give our coverage of the color you want. Paint I bought the color of the Wallpaper: gold-silver. In as. You can simply заколеровать plaster, that is, cut it with the paint in the ratio of 1/12. To paint fell uneven and again, original, you can apply it with a sponge roller or irregular strokes. Here's the master-class on a decorative plaster.
Комментариев нет:
Отправить комментарий