четверг, 4 октября 2012 г.

Why do I need a wash walls

During the repair, there may be situations when it is necessary to put the tiles, переклеить Wallpaper, painted or plastered walls. And in all these cases, first of all, care should be taken to thorough preparation of the surface, to which it is planned to work. Of course, if you order repair of apartments under the key, on the road you know and do not necessarily. Our article is for those who make the repairs yourself or want to fully control the entire process of finishing of the apartments, even in the case when it makes a professional builders.

So why need a primer? Mounted on the walls of the coating should serve not one year. This is one of the reasons for priming the surface.

Not to be presented by the main surface such as concrete or гипсолит, wood or metal, all of coverage, which will be installed on it should stay as long as possible. For the sake of it and apply the primer, which quickly penetrates into the structure of the repaired surfaces and improve its grip with a new layer.

With fastening qualities, primer often prevent someone from damage to the underlying surface.

In addition priming the preparation of the need for a more uniform imposition and absorption materials such as paint, glue for Wallpaper, plaster or putty. Due to this improves the quality of the final decoration.

Windows of wood


Today there are many companies offering to buy wooden Windows. But their main goal «quantitative sale», and only a few seek to «sell quality».
 But the window - this is the element of the interior, through which the house rushes sunlight. Sometimes we are so forget about them, that looking through a glass, not recognizing the significance of the Windows as such. But it is only in that case, if we, one day buying the window, made the right choice. That provides the quality of the higher illiteracy rate decision. And so, too, if You want to buy wooden Windows, rely not only on the advice of friends. Learn everything you need about them, it will talk to the seller-consultant at the same level (and sometimes, unfortunately and above). Material wooden frame
 First of all it will be necessary to decide what material You want to buy the wooden Windows. Tree species are divided into coniferous and deciduous trees. Wooden Windows from coniferous breeds (pine, spruce) will serve less, but they are also cheaper. In the production of Windows made of pine or spruce tree in need of special treatment because of the instability to moisture. The cheapness of wood of coniferous breeds summoned and its softness. In other words, at mechanical influence is still quite noticeable tracks, and even pots from under the flowers on the window-sill after several years of leave imprints.
 If you buy the wooden Windows are made of oak or larch, the long service life guaranteed. But they are significantly worse retain heat in the room. To the characteristics of oak applies not only strength, but also a lot of weight. Therefore, to reduce the load on the hardware is better to buy a wooden Windows with the minimum possible profile of the frame and sash. And as the oak refers to materials, drying of which pleased complicated, then buy a wooden Windows had better secure a trusted manufacturer.
 Wooden Windows made of larch are «Golden middle» between the previous two. Firstly, the hardness of the characteristic oak wood of larch significantly easier. Secondly, at the price of the window of larch concede to analogues of pine (approximately one and a half times), but it is not exposed to moisture and harmful insects. The dignity of the larch is in the fact that if at some of the stages in the production of mistakes have been made, the defects of the wood becomes immediately obvious (cracks, deformation). So often it is recommended to buy such wooden Windows. Production of wooden Windows
 You can buy the wooden Windows of almost any shape, size also have no restrictions.

The window of Plastmasy


We all have already got used to the wooden Windows in the apartment, though they had for years brought us a lot of discomfort. Remember drafts, annual insulation and painting, deformation of RAM... But, as they say, what they had, they might have had... fortunately, there appeared a worthy replacement of the old wooden window - the window of of metal-plastic (PVC) profiles, which are not only deprived of all the shortcomings of wooden Windows, but also have a number of valuable qualities. The main advantage of plastic Windows in front of other species, and one of the main reasons for which we make a choice in favour of them - it is their ability to protect the room from the noise and low temperatures. Undoubtedly, quality correctly installed window construction of the PVC has excellent insulating properties.

понедельник, 1 октября 2012 г.

Decoration of the walls tree


Historically, our house we used to finish off the wooden parts. The walls of the houses mainly constructed of concrete, bricks, but when the elements of decoration are wooden interior and exterior fragments, then the house immediately acquires its own unique flavor, as well as a cozier, warmer. No surprise that homeowners, building a brick wall in his house, ordered the desired finish, which is able to transform the walls of the house under the framework. Even those who doubt the durability of wood is often wish country house at least by the outwardly resembled a classic wooden building. The house decorated thus, can have very different external features. Very often, if the owner of like smooth surface of the coating, the top of the main walls secured lining of the linings. Batten, as a rule, is covered by a certain compositions. Compositions avoid fire and rotting wood trimmings. Also lining can be painted or varnished. Frequently used option of finishing, which resembles a log cabin. Profile of this material has the shape of a semicircle. This finishing material is attached to the main wall and is covered by the relevant anti-corrosion compositions.

Interior decorating the tree also has a long history. Historically, the legislators in the finishing of the premises of the tree can safely be called Europe. Special successes in the finishing of the premises of the tree reached the British. The constant problem of bad warmed stone walls was solved, as only within the premises of the houses and castles began to shut down the interior wood finish. In the houses became much cozier and warmer. The hosts started to save on heating materials. However, in cases of finishing of the house tree did not forget the aesthetic side of the question. If the landlord was a prosperous man, the more expensive decoration he could order. Then fashionable trend at the finish of the tree come and in Russia. Fashion at the finish of the acquired here own specifics. Up to now are exhibited in the museums of the true masterpieces of these craftsmen. But in our time have not forgotten about the finishing of the interiors of the tree. This is mainly typical of the decoration of individual country houses. In our time, finished with wood inner premises can afford the homeowner even with an average income level. Most importantly have the desire and the taste.

Finish the cork material


Until recently, cork, associated with us exclusively with the products of the wine-vodka industry. However, the materials from the bark of the cork oak are also excellent finishing materials. Finishing materials made of cork have good heat and sound insulating qualities, but also excellent acoustic properties.

Cork oak "Quercus Suber L" appeared in the nature of the more than 60 million years ago and belongs to the famous family of beech and chestnut trees. Favorable for its active growth are the natural and climatic conditions of the region of the Western Mediterranean. Portugal is the Motherland of cork plantations, and on its territory accounts for more than 33% of the world's given for the planting of cork oak. Followed by Spain (23%), North Africa, including Morocco, Algeria and Tunisia (33%), Italy and France (11%).

More than 51% of the total world volume of cork raw material falls to the share of Portugal - the undisputed leader of this production. The country pays great attention to upgrading and renewal planting cork trees. The first time the bark is removed from the tree when it reaches the age of 25-30 years, and is called "девственной". The operation is carried out in the period from June to August and is very delicate, so that not to harm the tree, otherwise reduces the life of the tree. Recovering the bark of every 9-11 years depending on the climatic conditions and the place of growth. The duration of the life of the tree, on average, 200-250 years. During this time, it gives about twenty "harvest", the best of which - from a tree at the age of 150 years.

It is believed that the first application of the bark of the cork oak belongs to the ancient civilizations of Greece and Rome, who used the bark for packing of amphorae with wine and olive oil, production of floats and buoys fishing nets, the manufacture of shoes, and roofs of own houses. Structure and chemical composition of cell membranes cork oak determine the specific properties of the cortical of the material. The most obvious characteristic is the ease. Hundreds of years the property was used in the manufacture of floats for fishing gear.

Decorative plaster stet

 Most likely each, for the first time he saw the room, the design of the walls of which are decorated with this type of finishing material, could not understand where and from which it turns out is such a beauty? Know how to properly apply a decorative plaster on the walls with their hands, then to proudly display beautifully and originally looking package apartment or separate room (for example corridor) friends and relatives? Want to disappoint you: I don'T know. But really want to learn and learn. Let's learn together.
So, let's start from the beginning... And at first I wanted to use a decorative coating the whole of its passage. But then the frightened, whether began to feel sorry for, but the corridor I поклеила Wallpaper. BUT... there is one more detail: in the middle of the corridor with me hanging bearing beam. To remove it, I can not. Long thought, what to do with it: too pokleit Wallpaper, finished with stone or brick. Then it dawned on me. I remembered a decorative plaster and decided all the same to take a risk and try it finished with their beam.

For a start I like you crawled into the Internet and seen enough video materials on which the technology of applying the plaster was quite clearly shown. Also described in detail what kind of plaster buy and what tools to use.

Armed with the knowledge, I went for the source materials in Максидом (not advertising) Where, after a short walk, I saw a booth with the right materials me... Пораспрашивала a little, standing next любезнейшего of the seller and eventually acquired the following...

воскресенье, 30 сентября 2012 г.

Ceiling painting


You have already chosen and bought a paint tool, released from the furniture to the room in which you will paint the ceiling and perform all work necessary for the preparation described in article painting the ceiling. It is time to understand what is the technology of painting the ceiling. The quality and durability of the paint your ceiling depends directly on whether the technology of painting the ceiling is made in full on all stages of the work.
Preparation of the base ceiling. The ceiling before the painting is in the cleaning of the surface from the old paint, whitewash. All speakers irregularities treated with sandpaper, small cracks, pre-moistened with water, wipe putty. The prepared surface should be cleaned from dust formed in the process of preparation of the ceiling.
Primer ceiling. Before painting of the ceiling, you must perform the paint surface. Without primer paint will not be held on the ceiling (ceiling quickly absorb a moisture and paint dry up, almost losing the property of a full-sizable fledged adhesion) and eventually begins to crumble. When the primer has dried up to the most dark spots. If you want to smooth the surface of the ceiling, then after full drying of the first layer of primer is re-primer. It is necessary to pay attention to the fact that the surface of the no extra priming structure.
Painting the corners of the ceiling. Paint the corners of the ceiling should start from the farthest corner relative to the input. Need to wet brush in the paint to half the length of the cloth and wipe the excess paint on the inside of the tank with the paint. painted brush strip of 3-5 cm around the perimeter of the flow in such a way that when painting roller of the main surface of the ceiling, roller not spoiled the corners and the line connecting the walls and ceiling.